Remberg ISO-plus-CAN, Руководство пользователя

Страница: 21 / 43

User manual - 23
9 Table of configuration parameters
9.1 GROUP A - ANALOGUE INPUT
1
SEN.
Sensor (Word modbus 2001)
Analogue input configuration / sensor selection
0 Tc-K -260 °C..1360 °C. ( Default )
1 Tc-S -40 °C..1760 °C
2 Tc-R -40 °C..1760 °C
3 Tc-J -200 °C..1200 °C
4 Tc-T -260 °C..400 °C
5 Tc-E -260 °C..980 °C
6 Tc-N -260 °C..1280 °C
7 Tc-B 100 °C..1820 °C
8 Pt100 -100 °C..600 °C
9 Ni100 -60 °C..180 °C
10 NTC10K -40 °C..125 °C
11 PTC1K -50 °C..150 °C
12 Pt500 -100 °C..600 °C
13 Pt1000 -100 °C..600 °C
14 0..10 V
15 0..20 mA
16 4..20 mA
17 0..60 mV
18 Potenziometer (set the value on parameter 5)
2
deGr.
Degree (Word modbus 2002)
0 °C Centigrade (
Default
)
1 °F Fahrenheit
2 K Kelvin
3
Lo.L.i.
Lower Linear Input (Word modbus 2003)
Range AN1 lower limit only for linear input. Ex: with input 4..20 mA this
parameter takes value associated to 4 mA.
-32767..+32767
,
Default
: 0.
4
up.L.i.
Upper Linear Input (Word modbus 2004)
Range AN1 upper limit only for linear input. Ex: with input 4..20 mA this
parameter takes value associated to 20 mA.
-32767..+32767
.
Default
:10000
5
Pot.v.
Potentiometer Value (Word modbus 2005)
Select potentiometer value
1..150 kohm . Default : 10kohm