Raymarine e7, Справочник пользователя

Страница: 46 / 320

3.15 Initial set up procedures
Once your display has been installed and commissioned (see
Installation instructions), Raymarine recommends that you perform
an initial set up procedure.
Start-up wizard
When you power-up the display for the first time a Start-up Wizard
is displayed. The wizard guides you through the following initial
settings:
• Language selection.
• Boat type selection.
• Units configuration.
Note: These settings can also be made at any time using the
menus accessible from Homescreen > Customize .
Additional settings
In addition to the settings covered by the Wizard, it is also
recommended that the following initial set up tasks are completed:
• Set minimum safe depth.
• Set your date and time preferences.
• Adjust the display brightness (and set up a shared brightness
scheme if appropriate).
• Align the touchscreen.
• Designate the data master.
• Select the GPS data source.
• Familiarize yourself with the Simulator Mode.
Setting the vessel minimum safe depth
You can change the appearance of the vessel in the chart
application.
With the homescreen displayed:
1. Select
Customize .
2. Select Boat Details .
3. Select Minimum Safe Depth .
4. Use the rotary to adjust the setting as appropriate. The units
for the depth measurement are based on those specified in
the
Homescreen > Customize > Units Set-up > Depth Units
menu.
Setting time and date preferences
With the homescreen displayed:
1. Select
Customize .
2. Select Time and Date Set-up .
46 e7 / e7D — User reference