![background image](http://html.mh-extra.com/html/raven/viper/viper_installation-and-operators-manual_788944103.webp)
9
Differential GPS (DGPS) Set Up:
95
DIFFERENTIAL GPS (DGPS) SET UP
6. Select Save to save the software to the home or office computer. Select a commonly used download directory
or a destination which will be easy to locate after the download completes.
NOTE:
It may be necessary to accept any security or warning prompts displayed by the browser or computer
system to successfully save the software update to the computer.
UPDATING THE RECEIVER FIRMWARE
To apply the firmware update to the ROS device integrated receiver:
1. Shutdown the ROS device. Refer to the System Shutdown section on page 131 for assistance with the proper
shutdown procedure.
2. Connect a serial cable from the PC to the connector labeled “GPS Output” on the ROS device cable.
NOTE:
A USB to serial adapter may be required if the PC or laptop does not offer a serial port.
3. Extract, or unzip, the receiver update zip file.
4. On the PC or laptop, open the downloaded firmware update folder and locate the WinLoad application.
5. Click on the settings option in the upper, left corner of the WinLoad window and select COM Settings....
6. In the Com Port Setup prompt, select the com port on the PC or laptop connected to the GPS out connector.
Refer to the operating system help for assistance determining which com port is connected to the ROS device
cable.
7. Set the Download Baudrate to 115200.
8. Set the Connect Baudrate to 9600 and click OK.
9. Click File in the upper, left corner of the WinLoad window and select File Open....
10. Use the file browser to locate and select the receiver update .hex file. The file information should now be
displayed in the main WinLoad panel.
11. Click the Write Flash button to the right side of the main WinLoad panel. Immediately start the next step when
the timer displays.
12. Press the power button on the ROS device.
13. The WinLoad program should display information in the main panel to indicate that the update is in progress.
14. Wait for the WinLoad update to complete.
15. Once the update has finished, close the WinLoad application and restart the ROS device.
16. Verify the NMEA and Source settings as appropriate before beginning any field operations.
CAUTION
Integrated GPS receivers with serial number
BFN1343 or lower are capable of OmniStar
corrections. All Viper 4 receivers can be
upgraded to GS. Depending on current
capabilities, purchasing an upgrade may be
necessary.
Содержание viper
