Raven viper Скачать руководство пользователя страница 34

Страница: 34 / 182

HAPTER

Viper/Viper 4+ Installation & Operation Manual

2. Touch the System Preferences tab on the General User Settings prompt. The following fields will be available:

Mode.

set the display mode for day or night operations.

Screen Brightness.

Adjust the screen brightness for personal preference and ambient lighting conditions.

LED Brightness.

Adjust the LED brightness for personal preference and ambient lighting conditions. This setting

will also adjust the brightness of a compatible light bar connected to the ROS device.

Automatic Power Down.

Enable the automatic power down option to automatically shut down the ROS device

when the vehicle ignition is switched off. This feature may be enabled to help ensure job information is saved

and the device is properly powered down.

NOTE:

The default setting for the power down feature is enabled. To monitor the vehicle ignition status, the

field computer will require the appropriate wiring harness and a connection to the vehicle ignition.

Without the appropriate harness, the power down feature will have no affect on operation of the ROS

device.

Calibrate Touch Screen.

Touch the calibrate touch screen button to begin the touch screen calibration process on

Viper 4.

ALARM SETTINGS TAB

To edit Alarm Settings:

NOTE:

Audible and pop-up alarms will be triggered based upon the product control user settings. Refer to

the Product Control User Settings section on page 28 for details on these user settings.

1. Touch the Administrator or User Panel along the top of the Main Panel display and select the User Profile

button.

2. Touch the Alarm Settings tab on the General User Settings prompt. The following fields will be available:

NOTE:

Refer to the ROS Product Control Calibration and Operation Manual for additional information on

setting alarm conditions.

Audible Alarms.

Enable this option to receive audible alerts for alarm conditions detected by the ROS device.

Popup Alarms.

Enable this option to receive a prompt for alarm conditions detected by the ROS device.

Audible Backup Warning Enabled.

Select this check box to enable an Audible Backup Warning alarm.

Administrator

or User Panel

User

Profile

Alarm

Settings

Содержание viper






















































































































































































Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды

Raven viper, Инструкция по установке и эксплуатации

Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды