Raven viper Скачать руководство пользователя страница 133

Страница: 133 / 182

CHAPTER

Job Profile Panel and Configurations:

125

CHAPTER 13

JOB PROFILE PANEL AND

CONFIGURATIONS

OVERVIEW

The Job Profile panel contains configured job profiles and any jobs, completed or in progress, and currently stored

on the ROS device. Job profiles allow field information such as guidance lines or scouting features to be

preconfigured for various fields and assigned to the grower, farm, field (GFF) folder structure.

Jobs previously started on the ROS device are also available in the Job Profile panel until removed. To resume the

field operation, select the job file with the previous coverage map to be amended and begin field operation.

NOTE:

Perform file maintenance regularly to keep device resources available for active field operations.

Transfer completed job files to a home or office PC, or a Slingshot account, for backup and archiving.

JOB PROFILES

Job profiles allow the operator to select a profile with preset grower, farm, field (GFF) assignments, preferred

guidance type, and field scouting information, all with one touch instead of multiple procedures to load each of

these options.

Job profiles may be used to provide as much, or as little, of the above information as needed or desired for a

grower or custom applicator operation. This function is not required.

JOB PROFILE PANEL OVERVIEW

Touch the Job Profile area toward the bottom of the main panel display to expand the Job Profile panel. The Job

Profile panel displays job profiles and previous job files in progress and stored on the ROS device.

Job

Profile

Editor

Jobs

Filter

Содержание viper






















































































































































































Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды

Raven viper, Инструкция по установке и эксплуатации

Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды