Raven viper, Инструкция по установке и эксплуатации

Страница: 25 / 182

4
Navigation Overview: 17
NAVIGATION OVERVIEW
CAN SYSTEM CONFIGURATION
A machine configuration saves vehicle or tractor calibration information, implement geometry for each
configured implement, and CANbus system information. If a configuration is completed for a specific implement,
the ROS device will automatically identify and select the matching configuration on start up. The ROS device will
also alert the operator if a CAN component in the saved profile is not detected.
Refer to Chapter 8, Machine Panel and Configurations for detailed information on setting up machine
configurations for the various implement types available with ROS.
MACHINE CONFIGURATION AND IMPLEMENT GARAGE
In some instances, a machine configuration may match more than one equipment set up such as a tractor used
with a plow, swather, hay rake, or a rock picker. If desired, create profiles for each of these implements to allow the
ROS device to save geometry and guidance settings for each specific implement. When ROS detects a set up
matching these configurations, the device allows the operator to select the saved machine configuration to
quickly set up the field computer for the days operations.
ROS also allows a system administrator or operator to access other saved configurations via the machine or
implement “garage” to modify or remove profiles to keep the ROS device updated for the equipment currently in
the fleet or machine shed.
Refer to Chapter 8, Machine Panel and Configurations, for additional information on selecting and modifying
machine configurations and using the machine and implement garages.
PRODUCT CONFIGURATION PANEL
The product configuration panel provides the
following utilities for setting up control channels for
common product applications, tank mixes, or seed
varieties which the ROS device will be used to control
input or application:
PRODUCT CONFIGURATION
ROS allows the operator or system administrator to set
up a profile for common applications, tank mixes, or
for upcoming field operations. The product
configuration saves control channel and product or
mix information for various application or product
types and allows the operator to reselect profiles to
quickly resume or restart an application or operation for various fields. New product configurations may be
created using existing products entered into ROS or via the agX product database pre-loaded on the ROS device.
Refer to the ROS Product Control Calibration and Operation Manual, for more information on setting up various
products and product configurations using ROS.
PRODUCT CONFIGURATION SELECTION
Once a product configuration is setup, the product may be selected to quickly set up ROS for operations and
resume operation or repeat the same operation in a different field. Simply select the product configuration, verify