Raven viper Скачать руководство пользователя страница 130

Страница: 130 / 182

HAPTER

122

Viper/Viper 4+ Installation & Operation Manual

5. If desired, press the unit to toggle between units (gal, pt, fl oz).

NOTE:

If needed, there is a mix calculator available to assist with determining the

appropriate mix. Press the Rate Calculator button and enter the desired values.

6. Once the Mix Name is entered, the Raven OS will set the “Display As” label for the mix. If

desired, touch the Display As field and edit the label (up to 4 characters) to be displayed

during field operations on user selected widgets.

7. Press the Tank Manager button.
8. Touch the Current Volume or Current weight field and set the current tank volume or bin

weight available for the mix or blend. This value is the total amount of product (carrier and

all ingredients) in the tank or bin.

NOTE:

To refill a tank or bin to the full capacity of the product tank or bin, touch the Refill

button. To refill all tanks or bins to full capacity, touch the Refill All button at the

top of the prompt.

MIX RATIOS AND INGREDIENTS

When configuring a control channel for liquid control, the Product Configuration prompt will display a Carrier and

Carrier Volume field. The Raven Operating System (ROS) uses the carrier volume or rate field to calculate the ratio

of carrier and mixed ingredients during the field application.

To enter carrier information for a tank mix:

1. Touch the Product Configuration panel and select a product configuration to modify or create a new

configuration.

NOTE:

Refer to the Create a New Product Configuration section on page 119 or the Edit an Existing Product

Configuration section on page 120 to create or edit a product configuration.

2. Touch the Edit button in the Product Configuration panel to edit the selected product configuration. If the

control channel is configured for liquid product control the Carrier and Carrier Volume fields will be displayed.

Touch the Carrier drop down selection and select the existing carrier product or select the Add button to create

a new carrier.

3. For liquid products, touch the Carrier Volume field and enter the volume of carrier used in the mix. This field is

used to set the ratio of product and does not have to reflect the actual volume of carrier in the tank.

For Example.

If a chemical supplier used 1500 gallons of water mixed with 500 gallons of a liquid fertilizer for the

nurse tank mixture, the Carrier Volume may be entered as 1500 and the ingredient volume may be entered as

500. The Raven OS will calculate the ratio for each tank load for the field application.

ADD INGREDIENTS

The lower portion of the Product Configuration prompt allows mix or blend ingredients to be added to the

Product Configuration. This information is used to calculate the ratios of product applied during field operations

with the mix or blend assigned to the control channel.

Rate

Calculator

Tank

Manager

Refill

All

Product

Configuration

Panel

Edit

Содержание viper






















































































































































































Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды

Raven viper, Инструкция по установке и эксплуатации

Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды