Raven viper Скачать руководство пользователя страница 127

Страница: 127 / 182

CHAPTER

Product Panel and Configurations:

119

CHAPTER 12

PRODUCT PANEL AND

CONFIGURATIONS

OVERVIEW

The product panel allows an operator or system administrator to set up control channel assignments and enter

product information for a field operation. A product configuration may be saved for common or recurring field

operations to will allow the operator to reselect the product settings from a previous operation to quickly change

the Raven OS setup for different configurations used during various field operations.

NOTE:

Product configurations will be displayed only for the selected machine configuration.

PRODUCT CONFIGURATIONS

Product configurations save information on products assigned to each control channel and may be used to quickly

set up the Raven OS for common or various input or application operations. The product configuration

information may be used to enhanced job reporting information and allows improved product information to be

saved, changed, and used quickly and easily.

CREATE A NEW PRODUCT CONFIGURATION

1. Touch the Product Configuration panel to display any available product configurations.
2. Touch the Add button along the left side of the display to create a new product configuration.

Create New

Product

Configuration

Edit Product

Configuration

Delete

Selected

Configuration

Selected Product

Configuration
Edit Product

Configuration

Available

Product

Configurations

Add

Product

Configuration

Содержание viper






















































































































































































Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды

Raven viper, Инструкция по установке и эксплуатации

Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды