Raven viper Скачать руководство пользователя страница 32

Страница: 32 / 182

HAPTER

Viper/Viper 4+ Installation & Operation Manual

USER INFORMATION TAB

The user information tab provides fields for entering the operator contact information. To enter or edit user

information:

1. Touch the Administrator or User Panel along the top of the main panel display and select the User Profile

button.

2. Touch the user Information tab on the General User Settings prompt. The following fields will be available:

User Name.

Enter a name for the user or profile that will be used to identify the profile on the field computer and

in job reports.

NOTE:

The user name in the administrator profile cannot be modified.

First and Last Name.

Enter the first and last name of the system administrator or equipment operator in these

fields.

Contact Information.

Enter the home and mobile phone numbers, fax number, and e-mail address as desired for

contacting the equipment operator in the associated fields.

Operator License Information.

Enter the operator license and expiration date in these fields.

LOCATION INFORMATION TAB

The location information tab provides fields for company contact information and desired display language. To

access location information:

1. Touch the Administrator or User Panel along the top of the Main Panel display and select the User Profile

button.

2. Touch the Location Information tab on the General User Settings prompt. The following fields will be available:

Company Name.

Enter the name of the company with which the operator or administrator is employed.

NOTE:

The user name in the administrator profile cannot be modified.

Company Address and Location.

Enter the company or branch address, city and state, and country of operation.

Time Zone.

Select the Coordinated Universal Time (UTC) for the time zone in which the ROS device will be

operating.

NOTE:

Time zone setting will affect the time shown on Job Reports.

Language.

Select one of the available languages desired for operation of the ROS device. Each equipment

operator may select a different language for operation and ROS will automatically switch to the desired

language on log in.

Administrator

or User Panel

User

Profile

User

Information

Administrator

or User Panel

User

Profile

Location

Information

Содержание viper






















































































































































































Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды

Raven viper, Инструкция по установке и эксплуатации

Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды