Raven viper, Инструкция по установке и эксплуатации

Страница: 166 / 182

C
HAPTER
16
158 Viper/Viper 4+ Installation & Operation Manual
If an optional section control system is enabled for field operations, the field boundary will also create a basic
zone map for the field. Refer to the calibration and operation documentation for the optional section control
system or contact a local Raven dealer for additional assistance with setting up or using section control features
with ROS.
NOTE: To review the field boundaries, go to the field review mode and touch anywhere in the field boundary
to view the field boundary acres.
Spray and Plant Zones. Zone map features may be used to assign areas of a field to zones designated for
coverage or no-coverage.
If the optional automatic section control system is enabled, ROS will reference the zone map for section control
features during the field operation. Refer to the calibration and operation documentation for the optional
section control system or contact a local Raven dealer for additional assistance with setting up or using section
control features with ROS.
Scout Zone. Scout zones may be used to mark field areas for future reference or that may require attention. For
example, use a scout zone to mark an area that has rocks, flooded areas, or a particularly heavy weed or insect
infestation. When recalled in a future job, the operator will be able to find the area using the recorded scout
zone. Scout zones will not provide any section control options, but may be useful for reference or to relocate
specific areas within a field.
Scout Line. A scout line may be recorded to mark a swath or dividing line within a field area. Similar to scout
zones, a recorded scout line will not provide any section control or guidance options but may be used for
reference or to relocate areas within a field.
Flags. Flags may be used to mark a spot in a field and may be used for reference or to relocate a spot within a
field.
SCOUT GROUP MANAGER
Refer to the following sections to manage scout groups and group features during field operations.
CREATE A NEW SCOUT GROUP
To create a new group for scouting features:
1. Tap the Scout Group widget on the Guidance View or Mode.
2. Touch the Add Scout Group button.
NOTE: It may be beneficial to identify the scout group with the application or field id.
3. Tap the Done button in the upper, right corner of the Scout Group Manager prompt to return to the Guidance
View or Mode.
NOTE: Scout groups may be deleted using the File Maintenance features without an active job in progress
on the ROS device. Refer to Chapter 7, File Manager, for assistance with using the file manager
utilities.
Scout Group
Add Scout Group
Done