![background image](http://html1.mh-extra.com/html/ransburg/19372/19372_service-manual_3683758006.webp)
AH-95-02.4
2
2
2
2
2
A R E A
A R E A
A R E A
A R E A
A R E A
Tells where
hazards may occur.
H AZ AR D
H AZ AR D
H AZ AR D
H AZ AR D
H AZ AR D
Tells what the hazard is.
SAF EGUAR DS
SAF EGUAR DS
SAF EGUAR DS
SAF EGUAR DS
SAF EGUAR DS
Tells how to avoid the hazard.
Spray Area
Spray Area
Spray Area
Spray Area
Spray Area
Electrostatic Arcing
Never operate the spray gun without properly
grounding the following.
A. Operators
Operators must be grounded. Rubber soled
insulating shoes should not be worn. Grounding
leg straps may be used.
Operators must maintain contact with the
handle of the gun. If work gloves are used, the
palm section should be cut out.
Operators must remove from themselves all
metal objects that are not grounded.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: REFER TO NFPA 33 REGARDING
OPERATOR GROUNDING.
B. Parts being sprayed. Resistance between the
part and a grounded conveyor must not exceed
1 megohm.
C. Every metal and conductive object in the spray
area. This includes the booth, parts hangers,
fire extinguishers, conductive flooring, etc.
Grounded conductive flooring must be provided in
the spray area.
Turn off voltage at the power supply before flushing
out, cleaning, or removing any parts from the gun.
Provide proper protection for waterborne supply
systems.
Never install a spray gun into a fluid system using
an isolated solvent supply.
Always discharge Waterborne system capacitance
prior to servicing.
Do not touch gun electrode while gun is energized.
Содержание 19372
Страница 4: ...AH 95 02 4...
Страница 61: ...AH 95 02 4 NOTES NOTES NOTES NOTES NOTES...
Страница 62: ...AH 95 02 4 NOTES NOTES NOTES NOTES NOTES...