HP8648 emulation mode
1GP71_0E
135
Rohde & Schwarz
Status
Command / Function / Remark / Limitation
[SOURce:]AM:INTernal[1]:FREQuency value
Set / Query the frequency of the signal source.
Value:
400 HZ | 1 KHZ
Default:
1 KHZ
[SOURce:]AM:INTernal2:FREQuency value
Set / Query the frequency of the signal source.
Value:
20 HZ … 10 KHZ
Default:
1 KHZ
[SOURce:]AM:INTernal2:FUNCtion:SHAPe value
Select / Query the waveform of the signal source.
Value:
SINe | TRIangle | SQUare | SAW
Default:
SINe
Remark:
SAW and TRIangle are not supported.
Table 130: AM subsystem
•
CAL Subsystem
Status
Command / Function / Remark / Limitation
[SOURce:]CAL:DCFM
Eliminate offset, when dc coupling is active.
Remark:
Not tested for compatibility so far (due to missing instrument).
The elimination process takes abaut 10 secs.
Table 131: CAL subsystem
•
FM Subsystem
Status
Command / Function / Remark / Limitation
[SOURce:]FM[:DEViation] value
Set /Query the modulation deviation.
Value:
0 HZ … tbd
Default:
3 KHZ