RC3102 emulation mode
1GP71_0E
170
Rohde & Schwarz
•
Increments
Status
Command / Function / Remark / Limitation
IN0
Enable spin wheel.
IN1
Disable spin wheel.
IN2
Select step size to coarse (fixed).
IN3
Select step size to medium (fixed).
IN4
Select step size to fine (fixed).
IN5
Set step size to the value specified by the FS or AS command.
Table 164: Increment commands
•
Common
Status
Command / Function / Remark / Limitation
RS value
Set status byte mask.
GS1
Turn Standby mode on.
Remark:
Standby is simulated, RF output is turned off.
GS0
Turn Standby mode off.
Remark:
RF output is restored to the state before entering standby mode.
SF value
Execute special function.
Value:
80
transfer cw frequency to sweep start frequency
81
transfer cw frequency to sweep stop frequency
82
set sweep dwell time to 2(10) ms
83
set sweep dwell time to 20 ms
84
set sweep dwell time to 200 ms
85
set sweep dwell time to 1 s
Remark:
Only special functions noted above are supported.
DG value
Execute special function.
Remark: