QSI QS-2plus!, Руководство пользователя

Страница: 89 / 140

Section 6 RESET Feature Guide
u
89
T o U s e F l a n g e S o u n d s
•
First choose "Flanges Arm Enabled"
•
While the engine is running, hold down the bell button for about three
seconds
The flanges are armed when you hear a single horn or whistle hoot. (If the
engine is a slave engine, you will hear an air let-off "pssht" sound instead.
Listen carefully; this may be hard to hear over the other engine sounds.) When
you hear the sound (after about three seconds), release the bell button. Turn the
bell off with the bell button if you like.
•
While running your engine, press the Horn Button briefly, but not long
enough to blow the horn
This will trigger the flange sounds. If you do not hear the flanges, press the
horn button a little longer, about ½ second. If you hear the horn, you have
pressed the horn button too long. Continue pressing the horn button until
flange sounds come on.
•
Once the flange sound begins, you can draw out the sound by pressing
the button quickly and repeatedly
This produces a long, continuous squealing sound, perfect for flanges.
When you are in Flanges Arm Enabled, and you interrupt the power after
running your engine, you also disarm the squealing flange sounds. To hear the
sounds again, do not return to this RESET Feature. Just repeat the arming steps
with the bell or horn button and throttle, and you will hear the flange sounds
again.