manualshive.com logo in svg

QSI QS-2plus!, Руководство пользователя

Поделиться
Скачать
QSI QS-2plus! Скачать руководство пользователя страница 84

u

Section 6 RESET Feature Guide

84

#44: All De-Select

This option lets you de-select (turn off) all your QS-1 and QS-2+ engines,
including those without assigned ID numbers.QS-2 engines do not accept the
All De-Select command.

With All De-Select, you can quickly turn off all your QS-1 and QS-2+ engines,
and run an engine not equipped with QS-1 or QS-2+ on the same track.

If you're using all QSI equipped engines with assigned ID numbers, and you
want to select one engine to run, it's easier to simply select the engine in
RESET Position #0 than use All De-Select. When you select one engine with
an ID number, all other QSI equipped engines with ID's are automatically de-
selected.

You must have a bell button, and be using System 2 from RESET Position #20.

The factory default setting is " Disabled."

   T o   E n a b l e   o r   D i s a b l e   D e - S e l e c t

••

Find RESET Position #44.

••

Press the Horn Button.

Each time you press the horn button you will hear one or two "dings."

1 "ding" = "Disabled": you 

will not

 be able to de-select all your QS-2+

engines at one time.

2 "dings"  = "Enabled": you 

will 

be able to de-select all your QS-2+ engines

at one time.

    T o   D e - S e l e c t   Y o u r   Q S - 2 +   E n g i n e s

•

 

Place all engines in RESET

•

 

Turn the throttle to a low power setting (below 10v.)

•

 

Press the Bell Button for three seconds

All QS-2+ engines will go silent.

    T o   S e l e c t   o n e   D e - S e l e c t e d   E n g i n e

ding, ding

You can now de-select all QS-1 and QS-2+ engines at once.

Содержание QS-2plus!













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды