QSI QS-2plus! Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 140

QSI QS-2plus! Скачать руководство пользователя страница 29

Section 4 RESET Features

u

29

Step by Step Description of Moving through RESET

Features, and "Clinks" and "Clanks"

••

Put your engine in RESET

Turn off the power and wait three seconds for the single "ding". Turn the power
back on. You are now in RESET.

••

Push the throttle all the way up as far as it will go and back down to a

low setting, but not off

You will hear a "pssht" sound from the Air Let-off, followed by a single
"clink". You are now in RESET Position #1.

Note:

If you accidentally turned the throttle down so low that the power went

off, then your engine is no longer in RESET and will go forward. Just do
another RESET and start again.

••

Now push the throttle all the way up and back down, but not off

You will hear the "pssht" sound, followed by two "clinks". You are now in
RESET Position #2.

When you are using RESET Positions, the engine sounds automatically turn off
after RESET Position #1 so you can hear the "pssht" sound more easily.

••

Push the throttle up and down three more times (five times total)

You will hear "pssht" followed by one "clank". A "clink" equals one up and
down movement of the throttle, and a "clank" equals five movements.

At RESET Position six you will hear another "pssht", then "clank, clink" or
five plus one to equal RESET Position #6.

Try moving the throttle up and down quickly, using the "pssht" to help you
keep count. Then stop occasionally and listen to the "clanks" and "clinks" to see
if you counted correctly.

If you wish to return to an earlier RESET Position, do a RESET and start over.

Note:

If you are using a Lionel Cab-1/PowerMaster



, you may have problems

with voltage levels or response time. See Appendix I, "Troubles in RESET,"
and Appendix VI, "Using the Lionel Cab-1/PowerMaster with QS-2+" for more
information.

«
...
27
28
29
30
31
...
»

Содержание QS-2plus!













































































































































Отзывы:

Нет отзывов