QSI QS-2plus!, Руководство пользователя

Страница: 77 / 140

Section 6 RESET Feature Guide
u
77
T o A r m a n d U s e P F A o r Q S M :
•
First choose "Enabled for PFA" or "Enabled for QSM"
•
While the engine is running in forward or reverse, hold down the bell
button for about three seconds
PFA or QSM is armed when you hear a single horn or whistle hoot. (If the
engine is a slave engine, you will hear an air let-off "pssht" sound instead.
Listen carefully; the "pssht" may be hard to hear over the other engine sounds.)
When you hear either the horn or air let-off, release the bell button. Turn the
bell off any time you like using the bell button.
Continue to run the engine in the same direction as long as you like. The
engine stays armed for PFA.
•
Bring the engine to a stop and interrupt the power to put your engine
in neutral
If the brakes have been enabled in RESET Position #45, you may hear brake
sounds.
If you left the bell on, it now shuts off automatically. You have entered PFA or
QSM. You will hear sounds appropriate to your type of engine. If your engine
is enabled for PFA, the passenger station or freight yard announcement will
begin. You can stay in neutral as long as you like.
Continuing the PFA or QSM sequence:
•
Interrupt the power to move to the next part of the sequence
You may hear two short air let-offs ("pssht, pssht"). Normally, your engine
would move, but in PFA or QSM, your engine does not move. The engine
sounds are for a yard unloading area, or a station where people are moving on
and off the train. You can stay here as long as you like.
•
Interrupt the power to move to the next part of the sequence
You will hear "pssht, pssht" and background engine sounds. If you have
passenger station announcement, the departure message begins after about 5
seconds. You can stay here as long as you like.
•
Interrupt the power to put your engine in forward or reverse
Your engine does not move right away. If your engine has passenger station
announcement, you will hear "All Abroad!" and the sounds of passenger car
doors shutting. The engine horn "hoots" two times. Then the bell comes on.
Turn the bell off any time you like using the bell button.
After about 12 seconds, the engine moves out. At about 20 seconds, the bell
shuts off automatically and the PFA or QSM sequence is over.
Note: If you interrupt the power after you first enter neutral, and before the
announcements begin, PFA or QSM is canceled and your engine will move out.
To leave PFA or QSM at any time in the sequence, turn off the power for three
seconds and go into RESET.