QSI QS-2plus!, Руководство пользователя

Страница: 125 / 140

Appendix VII Glossary
u
125
Computer
Restart
After the power has been off for 15 seconds or more, the QS-2+
will come up in RESET when the power is re-applied. You will
hear two "dings" telling you all systems are up and running. Also
called Hard RESET.
DCRU
QSI reverse unit used in engines that have DC or "Can" motors.
De-Select
Engines are de-selected when you select another engine using ID
numbers. A de-selected engine remains silent and motionless
while selected engines are running. See All De-Select also.
Direction
State
Forward, Neutral and Reverse are direction states. RESET is a
special state, not a direction state.
Disable
To make a feature inoperable.
Dual Coil
Coupler Kit
With the QSI Dual Coil Coupler Kit, engines have working
couplers at the front and rear. Both couplers can be controlled
independently without using special control track sections. See
RESET Position #10.
E-Unit
Mechanical reverse unit used by Lionel since the early 1930’s and
still used today.
Enable
To make a feature operable. Another series of commands are
needed before the engine actually operates the feature. For
instance, when you unlock your house door you Enable it to be
opened but you may or may not open it at the same time. Couplers
are a good example.
Engine ID
One of three ways to assign ID numbers to your locomotive.
Engine ID is used to distinguish engines within a group or Road,
such as engine #4 in the Union Pacific Road 5.
Engine Plus
An easy way to select and operate groups of engines with ID
numbers, without using Engine and Road ID Numbers.
Factory
Default
Settings
Your QS-2+ has been pre-set at the factory to sound and operate in
a certain way. In Section 6 and on the Quick Reference Card the
factory default setting is given for each RESET Position. RESET
Position #18 allows you to return QS-2+ to the factory default
settings.
Feature
Choices
You have different choices in each RESET Feature. QS-2+ tells
you which choice you are in by the number of
"dings"
you hear
when you first press and release the horn button. Press the horn
button until you reach the choice you want. The choice you make is
set when you interrupt the power or move to a new RESET
Feature with the throttle.