QSI QS-2plus!, Руководство пользователя

Страница: 67 / 140

Section 6 RESET Feature Guide
u
67
#20: System Type
System Type refers to how signals are sent to your engine.
With System 1, there is no difference between using your horn button or bell
button to operate all QS-2+ features. In other words, your bell button will act
exactly like a horn button. Also, swapping the wires from the transformer to the
track makes no difference. This is the familiar Lionel method used for blowing
horns on engines from the 1940's through the 1960's, before electronic horns
came along. Some train control features will not be operable in System 1, since
they require the use of a Bell Button.
System 2 distinguishes between the horn and bell button signals, so you can use
the horn button as we describe in this manual, and the bell button to operate the
bell in any direction state.
Choices for Systems 3 through 6 have been added for future use. Systems 3-6
are not operational at this time. If an engine is placed in one of these choices by
mistake, the horn and bell buttons will not work. To regain control of your
engine, first do an Engine Unlock (see Appendix I, or the Quick Reference
Card). Then return to this RESET Position and choose either System 1 or 2.
The factory default setting for this Feature is "System 2."
T o S e l e c t y o u r S y s t e m T y p e
••
Find RESET Position #20
••
Press the Horn Button
Each time you press the horn button you will hear one to six "dings."
1 "ding" = System 1
2 "dings" = System 2
If you hear three to six "dings," continue pressing the horn button to cycle back
to the beginning. Do not leave RESET with the engine in Systems 3-6 at this
time.
When your engine is in system 1, and power is turned off, you will not hear the
normal RESET time-out "ding."