manualshive.com logo in svg

QSI QS-2plus!, Руководство пользователя

Поделиться
Скачать
QSI QS-2plus! Скачать руководство пользователя страница 43

Section 6 RESET Feature Guide

u

43

Note:

 When a diesel is selected, you will hear a short air let-off ("pssht"),

followed by the engine motor starting and building up to a full idle. When a
steam engine is selected, you will hear a short air let-off ("pssht"), and the
sound of the air pump coming on.

    T o   S e l e c t   A n d   R u n   E n g i n e s   w i t h   a n   a s s i g n e d   R o a d   I D

N u m b e r   ( R E S E T   P o s i t i o n   # 1 5 )

Temporary ID Numbers must be cleared before you can run engines using Road
ID Numbers.

••

Do a RESET

You are in RESET Position #0.

••

Press the Horn Button the number of times equal to the Road ID
Number assigned to the engine(s) you want to run

This is the same as selecting engines with Temporary ID Numbers. Each time
you press the horn button, the engines assigned that Road number will be
selected. For example, press the horn button once and engines with Road ID
Number 1 are selected. Press it again, and engines with Road ID Number 2 are
selected while engines with Road Number 1 are de-selected. Continue until you
reach the group of engines you want to run.

If you interrupt the power, all of the selected engines will operate while the
other QS-1 or QS-2+ engines sit silent and motionless. If you wish to operate
one engine in this group, you need to select the engine using Engine Select
(RESET Position #1).

    T o   D e - S e l e c t   ( T u r n   O f f )   Y o u r   S e l e c t e d   E n g i n e

••

Do a RESET

••

While in RESET, press the Horn Button any number of times except
the Temporary/Road ID Number of your engine

If you want all your engines de-selected, press the horn button for an ID
number that has not been assigned to any engine. You might want to save a low
number for this purpose.

    A l l   S e l e c t :   S e l e c t i n g   a n d   R u n n i n g   A l l   E n g i n e s

Select all your QSI equipped engines without selecting them one at a time.
With All-Select, you do not have to assign them a common Temporary ID
number to all the engines being used in a multiple-headed consist. Also, if you
forget your engine's Road and Engine ID numbers, you can still select it using
All Select.

••

Do a RESET

You are in RESET Position 0.

Содержание QS-2plus!













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды