Qlogic QLA2 Series, Руководство пользователя

Страница: 73 / 348

3–Interactive Commands
HBA Information Menu (Command Line Option -i)
SN0054614-00 K 3-21
If you select a number corresponding to an FCoE engine rather than a port, the
following general information is shown:
-----------------------------------------------------------------
Host Name : TARGET3
HBA Model : QLE8042
HBA Description : QLE8042 Mercury CNA
Firmware Version : 1.1.0 (Operational)
-----------------------------------------------------------------
Where
Firmware Version
is the version of FCoE firmware installed on the
adapter, along with one of the following descriptions:
„
Operational
indicates you are using an installed version of the
application.
„
Golden
indicates you are running from the ROM version.
HBA Information
(Command Line Option -i)
2: HBA Information n : Port Number 1: HBA Information
This option produces the same HBA Information Menu available from the
General Information, Report menu. See “Generate Report (Per Adapter Port)”
on page 3-11 .
To view FCoE information, enter the following command line option:
scli -fcoe ( < hba instance > | < hba wwpn > ) --info
For the QL x 81 xx adapters only, additional information includes the ENode MAC
Address, which is that adapter’s FC node MAC address.
HBA Alias
(Command Line Option -ha)
2: HBA Information n : Port Number 2: HBA Alias
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
information about the adapter:
„ Adapter Model
„ WWNN
„ Serial number
„ Alias
With this option you can create, modify, or delete the symbolic name or alias , for
an adapter.