Qlogic QLA2 Series, Руководство пользователя

Страница: 36 / 348

1–Installation and Removal
Installing SANsurfer FC/CNA HBA CLI
1-18 SN0054614-00 K
Select package(s) you wish to process (or 'all' to process all
packages). (default: all) [?,??,q]: q
Enter 1 to proceed the installation.
6. Type the number that corresponds to your operating system, and then press
ENTER.
The pkgadd program does a series of checks, posts a script warning, and
asks whether to continue the installation. For example:
Processing package instance <QLSclix> from
</space/chuynh/scli/qlogic/Solaris/pkgs/x>
SANsurfer FC/CNA HBA CLI (HBA Configuration Utility) (sparc)
1.
xx.xx (Build xx Solaris 8-10)
QLogic Corporation
## Executing checkinstall script.
## Processing package information.
## Processing system information. 3 package pathnames are
already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
.
.
.
[ verifying class <none>]
## Executing postinatall script.
Installation of <QLSclix> was successful.
Macintosh Installation
To install SANsurfer FC/CNA HBA CLI on a Macintosh system, follow either the
standard GUI or command line installation method:
„ “Standard (GUI) Installation” on page 1-18
„ “Command Line Installation” on page 1-19
Standard (GUI) Installation
Follow these steps to install SANsurfer FC/CNA HBA CLI on a Macintosh using
the standard GUI method.
To install SANsurfer FC/CNA HBA CLI on Macintosh (GUI):
1. You must have Admin privileges to install SANsurfer FC/CNA HBA CLI. To
verify/enable Admin privileges, go to
System Preferences , select Account ,
and then Security Tab . Make sure the Allow user to administer this
computer check box is selected.
2. Download the SCLI
zip
file with Safari™ or other browser.