Qlogic QLA2 Series, Руководство пользователя

Страница: 109 / 348

3–Interactive Commands
Target Persistent Bindings Menu (Command Line Option -p)
SN0054614-00 K 3-57
Type the number for the option you want, and then press ENTER.
Target Persistent Binding: Unbind Targets
(Command Line Option -p)
6: Target Persistent Binding 1 - n: Target Persistent Binding HBA Instance n 3: Unbind Target(s)
The Unbind Targets option is like the Bind Targets option (see “Target
Persistent Bindings: Bind Target(s) (Command Line Option -p)” on page 3-55 ).
Target Persistent Binding (All HBAs)
6: Target Persistent Binding p: All HBAs
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
options:
„ Display Configuration
„ Bind Target(s)
„ Unbind Target(s)
Display Target Persistent Binding
6: Target Persistent Binding p: All HBAs 1: Display Configuration
When you select the Display Configuration option, the following information
appears. (Or, the message, No target persistent binding configuration on HBA
instance n appears instead):
„ Bind status ( Yes or No )
„ Device type ( Disk , for example)
„ Target information (model name and number, for example)
„ Port Name
„ Port ID
„ Target ID
Target Persistent Binding: Bind Targets
6: Target Persistent Binding p: All HBAs 2: Bind Targets
See “Target Persistent Bindings: Bind Target(s) (Command Line Option -p)” on
page 3-55 .
Target Persistent Binding: Unbind Targets
6: Target Persistent Binding p: All HBAs 3: Unbind Targets
See “Target Persistent Binding: Unbind Targets (Command Line Option -p)” on
page 3-57 .