Qlogic QLA2 Series, Руководство пользователя

Страница: 219 / 348

4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-45
-s
(Silent Mode)
In non-interactive mode, the system shows result and status messages generated
by SANsurfer FC/CNA HBA CLI (by default) unless suppressed by silent mode.
You can combine this option with the
-o
option (see == “-o (Output to a File)” on
page 4-37 ) so the output is saved in a file and does not appear in the CLI. For
example:
# scli -I all -s -o output.txt
-t
(Display Target Information)
To show the target information for all adapters in the system, type:
# scli -t [ <all> ]
To show the target information for a specific adapter, type:
# scli -t (< hba instance > | < hba wwpn >)
To show specific target information for a specific target on an adapter, type:
# scli -t (< hba instance > | < hba wwpn >) (< target wwpn > |
< target port id >)
Where:
To show the target information on all adapters, type:
-t [< all >]
To show the target information on a specific adapter, type:
-t (< hba instance > | < hba wwpn >)
NOTE:
„ The
-s
option is valid only in non-interactive mode.
„ You can use this option with all non-interactive mode options that have a
corresponding interactive mode option (see
Table 4-1 ). This option must
be the first or last command in the command line.
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
target wwpn = World wide port name of the target
target port id = Port ID of the target