Qlogic QLA2 Series, Руководство пользователя

Страница: 194 / 348

4–Non-Interactive Commands
Command Summary
4-20 SN0054614-00 K
Where:
To set an alias for the selected adapter:
# scli -ha (< hba instance > | < hba wwpn >) < alias >
To delete the current alias of the selected adapter:
# scli -ha (< hba instance > | < hba wwpn >) delete
To view the current alias of the selected adapter:
# scli -ha (< hba instance > | < hba wwpn >) view | ?
-i
(Display HBA General Information or VPD Information for One or All HBAs)
To show general adapter information or VPD information for all adapter ports in
the system, type the following command:
# scli -i [ <all> ] [ <VPD> ]
Where:
To show general or VPD information for a specific adapter, type:
# scli -I (< hba instance > | < hba wwpn >) [ VPD ]
To show VPD (QLA/QLE24xx only) for all adapter ports in the system, type:
# scli -i VPD
# scli -i all VPD
Where:
-kl
(Loopback Test)
Use the
-kl
command to perform the loopback test.
Use the
-kr
command to perform the read/write buffer test (see “Run a
Read/Write Buffer Test” on page 4-28 ).
To do a loopback test with the default parameters, type:
hba instance = Adapter number (use
-g
command to find)
hba wwpn = World wide port name of the adapter
alias = Symbolic adapter name. (100 characters, maximum)
all = All adapters in the system
VPD = Vital Product Data
all = VPD information for all adapters in the system