Qlogic QLA2 Series, Руководство пользователя, Страница: 178 / 348

4–Non-Interactive Commands
Display System Information (Command Line Options -g, -z, and -tp)
4-4 SN0054614-00 K
‰ Port Type
‰ Port State
„ Port Information
‰ Physical Port Number (switch port number), including:
‰ Port state
‰ Port type
‰ TX port type
‰ Port module type
‰ Attached Port (QLogic adapter, tape device, or disk device connected
to the switch physical port), including:
‰ Target/initiator
‰ Node name
‰ Port name
‰ Vendor ID
‰ Product ID (if applicable)
‰ Product revision (if applicable)
‰ Product serial number (if applicable)
‰ Adapter model (if applicable)
‰ Adapter serial number (if applicable)
‰ Adapter alias (if applicable)
‰ Port alias (if applicable)
‰ Driver version
‰ Firmware version
‰ Total number of devices (if applicable)
‰ Host (if applicable)
Host Configuration
Use these options to show the information for one or all of the adapter ports in the
system. The
-z
option shows the combination of the commands listed in
Table 4-1 . The commands are listed in alphabetical order.
.
Table 4-1. Options Shown by -z
CLI Description See User Guide Section
-c Show
adapter
settings
“-c (Show Parameter Settings)” on
page 4-8
-e
Configure boot device “-e (Boot Device View | Select | Dis-
able)” on page 4-11
-fg
View driver settings “-fg (Show Driver Settings)” on
page 4-16