Qlogic QLA2 Series, Руководство пользователя, Страница: 201 / 348

4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-27
-kl
( < hba instance > | < hba wwpn >) [{(< param name > | < param
alias >) < param value >}]
-kl
(Run HBA Diagnostics Loopback Test)
The < param name >, < param alias >, and < param value > options are described in
Table 4-11 .
The system shows the following information after a loopback test completes:
„ Test status
„ CRC error
„ Disparity error
„ Frame length error
-kr
(Run Read/Write Buffer Test)
Use the
-kr
command to do read/write buffer test. (To run the loopback test, use
the
-kl
command—see “-kl (Loopback Test)” on page 4-20 .)
To do a read/write test using the default parameters, type:
# scli -kr (< hba instance > | < hba wwpn >)
To do a read/write test with customized parameters, type:
# scli -kr (< hba instance > | < hba wwpn >) [(-EX | -EXCLUDE)
< target wwpn >] (< param name > | < param alias >) < param value >
NOTE:
Under Solaris, this feature is disabled if you are using the driver from the OS
installation CDs (QLC driver).