Qlogic QLA2 Series, Руководство пользователя

Страница: 176 / 348

4–Non-Interactive Commands
Display System Information (Command Line Options -g, -z, and -tp)
4-2 SN0054614-00 K
„ SAN target management (SDM) API version
„ List of adapters: adapter model, port number, WWPN, serial number (SN),
adapter number (adapter 0–n), and status (online/offline)
„ Total number of QLogic FC adapters detected
Host Configuration
(Command Line Option -z)
The command line option
-z
shows all of the adapter’s information in a single
command. The command format is:
# scli -z
SANsurfer FC/CNA HBA CLI shows the information in “Host Information
(Command Line Option -g)” on page 4-1 , as well as the following additional
information:
„ HBA General information
„ HBA Vital Product Data (VPD)
„ HBA Parameter Settings
„ Driver Settings Information:
‰ Group: Persistent
‰ Group: Binding
„ Devices/LUNs Information
„ Selective LUNs Information
‰ Boot Device Settings
To show the information for a single adapter, type the following command:
# scli -z (< hba instance > | < hba wwpn >)
Where:
To show the information for all adapters, type:
# scli -z all
NOTE:
The failover and SAN device management APIs are QLogic-specific libraries
required for SANsurfer FC/CNA HBA CLI. The versions of these libraries are
useful for debugging purposes.
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter