background image

4–Non-Interactive Commands
Command Summary

4-12

SN0054614-00  K

<

hba instance

> <

hba wwpn

> <

target wwnn

> <

target wwpn

> <

target 

id

> <

lun id

>

If the system does not have an adapter with a boot device selected, the following 
message appears:

There is no boot device selected for any HBA in the system.

Following is an example of the boot device option when viewing the boot device 
for a single adapter. In this example, no boot device is configured (selectable boot 
is disabled; the boot port name is all zeroes).

-------------------------------------------------------------
HBA 1: QLA2340  WWPN 

xx

-

xx

-

xx

-

xx

-

xx

-

xx

-

xx

-

xx

 Port ID 00-00-00

-------------------------------------------------------------
Boot Device Settings:
--------------------------------------
Selectable Boot: Disabled
--------------------------------------
(Primary) Boot Port Name

LUN

----------------------- ----------------------- 

------

00-00-00-00-00-00-00-00

00-00-00-00-00-00-00-00       0

Press <Enter> to continue:

To cause the OS to boot from the first target it finds with a LUN, select a boot port 
name of 

00-00-…00

 (selectable boot); this applies only if the boot BIOS is 

enabled.

To set a specific target as the boot device for a specific adapter, type the following 
command:

#

scli -e (<

hba instance

> | <

hba wwpn

>) <

target wwnn

> <

target 

wwpn

> <

target id

> <

lun id

>

SANsurfer FC/CNA HBA CLI checks all parameters to verify that the adapter, 
targets, and LUNs are valid.

If you select an adapter with no target or a target with no LUN, SANsurfer FC/CNA 
HBA CLI shows an error message and aborts.

NOTE:

Because x86 Solaris does not require the target ID, the Solaris command is:

#

scli -e (

<

hba instance

>

 | 

<

hba wwpn

>

) <

target wwnn

<

target wwpn

> <

lun id

>

NOTE:

The boot device setting option is not supported on Macintosh PowerPC.

Содержание QLA2 Series





























































































































































































































































































































































Отзывы: