Qlogic QLA2 Series, Руководство пользователя, Страница: 209 / 348

4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-35
To disable (deselect) a LUN on a specific target on a specific adapter, type:
# scli -m (< hba instance > | < hba wwpn >) {< target wwnn > < target
wwpn > < lun id > (0 | disable | deselect)}
To enable (select) all LUNs for a specific target on a specific adapter, type:
# scli -m (< hba instance > | < hba wwpn >) select | enable
< target wwnn > < target wwpn >
To disable (deselect) all LUNs for a specific target on a specific adapter, type:
# scli -m (< hba instance > | < hba wwpn >) deselect | disable
< target wwnn > < target wwpn >
To enable (select) all LUNs of all targets on a specific adapter:
# scli -m (< hba instance > | < hba wwpn >) select all
To disable (deselect) all LUNs of all targets on a specific adapter:
# scli -m (< hba instance > | < hba wwpn >) deselect all
-n
(Set Selected HBA Parameter)
To set a specific parameter on a specific adapter, type:
# scli -n (< hba instance > | < hba wwpn >) { (< param name > |
< param alias >) < param value > }
To restore the default BIOS (4G adapters only), type:
# scli -n (< hba instance > | < hba wwpn >) default
Where:
NOTE:
You can repeat the sequence
< target wwnn > < target wwpn > < lun
id > 1
to select multiple LUNs in the same command.
NOTE:
To select multiple LUNs in the same command, repeat the following
sequence:
< target wwnn > < target wwpn > < lun id > 0
hba instance = Adapter number (use
-g
command to find)
hba wwpn = World wide port name of the adapter
param name = Name of the parameters