Qlogic QLA2 Series, Руководство пользователя

Страница: 204 / 348

4–Non-Interactive Commands
Command Summary
4-30 SN0054614-00 K
Run Adapter Diagnostics Read-write Buffer Test
The
{(-ex | exclude) < target wwpn >}
parameters specify a device that
will be excluded from the read/write buffer test.
The system shows the following information after a read/write buffer test
completes:
„ Loop ID/status
„ Data miscompare
„ Link failure
„ Loss of sync
„ Loss of signal
„ Invalid CRC
Table 4-11 lists the
<
param name
>
,
<
param alias
>
, and
< param value >
options.
Table 4-11. Diagnostics Parameters
Name
<param name>
Alias
<param alias>
Value
<param value>
Description
DataPattern DP
Test pattern in hex format
a
Customized (00–FF)
Random pattern
CRPAT
b
CJTPAT
c
CSPAT
d
a
Valid two-character case-insensitive hexadecimal patterns.
b Compliant random data pattern in a valid FC frame, as defined by the ANSI document Methodologies for Jitter and
Signal Quality Specification - MJSQ Annex A - Test bit sequences.
00, 55, 5A, A5, AA, FF (see
Table 4-12 )
—
—
Loopback test only
Loopback test only
Loopback test only
DataSize
e DS
8, 16, 32, 64, 128, 256, 512,
1024, 2048 Actual data transferred during
any given pass of the test
TestCount
f TC
0–65535
0–10,000 Loopback test only
Read/write buffer test only
TestIncrement
g TI
1–65535
1–10,000 Loopback test only
Read/write buffer test only
OnError OE
0–2 0 = ignore
1 = stop
2 = loop on error
Table Notes