Qlogic QLA2 Series, Руководство пользователя

Страница: 190 / 348

4–Non-Interactive Commands
Command Summary
4-16 SN0054614-00 K
Network Interface Statistics Commands
To show the FCoE network interface statistics, issue the following command:
# scli -fcoe ( < hba instance > | < hba wwpn > ) --mon --nsl --port n
FCoE Log Commands
To show the FCoE available logs, issue the following commands:
To list available log IDs:
# scli -fcoe ( < hba instance > | < hba wwpn > ) --log --list
To show a specific log by log ID:
# scli -fcoe ( < hba instance > | < hba wwpn > ) --log --id
<logid>
In the previous commands, the variables indicate the following:
-fg
(Show Driver Settings)
To show the driver settings, type:
# scli -fg (< hba instance > | < hba wwpn >) (view | ?)
Where:
-fs
(Configure Driver Settings)
Type the following command to configure the driver settings:
# scli -fs (< hba instance > | < hba wwpn >) {(< param name > |
< param alias >) < param value >}
hba instance = Adapter instance number of an adapter port
hba wwpn = World wide port name of an adapter port
firmware file = File name of the new firmware (usually
.bin
)
portn
= FCoE access port 0 or 1
logid
= Available log ID (0– n )
NOTE:
Th e
-fg
option is valid only in non-interactive mode.
hba instance = Adapter number (use
-g
command to find)
hba wwpn = World wide port name of the adapter