Qlogic QLA2 Series, Руководство пользователя

Страница: 191 / 348

4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-17
Where:
The pairs < param name > < param value > and < param alias > < param value > can
be repeated to set multiple parameters in a single command.
Table 4-5 lists the driver configuration parameter names and aliases.
The following restrictions apply:
„ Under Solaris, the driver configuration feature is disabled if you are using the
driver from the OS installation CDs (QLC driver).
„ Under Linux, this feature is disabled if you are using the IOCTL or sysfs
(inbox) driver.
„ Under Macintosh, the
BindWWPN
and
BindPortID
parameters are not
changeable; Mac supports only the
BindWWPN
parameter.
hba instance
= Adapter instance number of an adapter port (use
-g
command to find)
hba wwpn
= World wide port name of the adapter
param name
= Name of the parameters
param alias
= Alias of the parameters
param value
= New value of the parameters
Table 4-5. Driver Settings Parameters
Description
Parameter Name
<param name>
Alias
<param
alias>
Value
a
<param
value>
a
0 = Disabled, 1 = Enabled
Persistently bound target(s) only
PersistentOnly PO
0, 1
Present persistently bound tar-
get(s) plus any new target(s) with
driver default
PersistentPlusNew PN
0, 1
Present targets with driver default
NewOnly b
b
Driver parameter
NewOnly
(
NO
) is supported only with the failover driver. If you select a QLA22 xx
adapter, all QLA22 xx adapters on the host will use the same settings. If you select a 23 xx adapter,
all 2G/4G adapters on the host will also use the same settings.
NO
0, 1
Bind devices by WWPN
BindWWPN BW
0, 1
Bind devices by port ID
BindPortID BP
0, 1
Table Notes