Qlogic 8400 Series, Руководство пользователя

Страница: 2 / 391

ii 83840-546-00 D
User’s Guide—Converged Network Adapters and Intelligent Ethernet Adapters
8400, 3400 Series
Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no
responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its
use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications
described in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no
representation nor warranty that such applications are suitable for the specified use without further testing or
modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
Document Revision History
Revision A, October 20, 2014
Revision B, November 14, 2014
Revision C, April 3, 2015
Revision D, September 16, 2015
Changes Sections Affected
Updated “Single-chip solution” bullet to exclude
QLE3442-RJ adapters
Removed universal management port (UMP) from
the list of manageability features
“Features” on page 2
Added the section Adapter Specifications “Adapter Specifications” on page 5
Moved “Network Link and Activity Indication” to
Appendix A
“Adapter LEDS” on page 359
In Table 5-1 , removed references to 1Gb adapters. “Introduction” on page 23
In step 1, added
modprobe -r bnx2
command
as an option.
“Load and Run Necessary iSCSI Software Compo-
nents” on page 30
Updated instances of QCS4 to QCS. Throughout
Added RSS support for VMware ESXi 6.0. “RSS” on page 52
Added VxLAN offload support for VMware ESXi
6.0.
Updated the default for enable_vxlan_offld to
enable_vxlan_offld =1.
“enable_vxlan_offld” on page 52
Added missing chapter, “Using QLogic Control
Suite”. Chapter 8
In step 5, removed IP addresses from the first bul-
let. “iSCSI Boot Configuration” on page 169
In step 4b, updated “driver” to “drive”.
In step 7b, updated “with iscsi=1” to “withiscsi=1”.
“Linux iSCSI Boot Setup” on page 182
In step 2, updated the bad cross reference to
“Viewing Resource Reservations”. “Configuring QLogic iSCSI Using QCS” on
page 194
Added iSCSI offload support for VMware ESXi 6.0 “iSCSI Offload on VMware Server” on page 212