Qlogic 8400 Series, Руководство пользователя

Страница: 389 / 391

359 83840-546-00 D
A
Adapter LEDS
For copper-wire Ethernet connections, the state of the network link and activity is
indicated by the LEDs on the RJ-45 connector, as described in
Table A-1 . For fiber
optic Ethernet connections and SFP+, the state of the network link and activity is
indicated by a single LED located adjacent to the port connector, as described in
Table A-2 . QLogic Control Suite also provides information about the status of the
network link and activity (see “Viewing Vital Signs” on page 101 ).
Table A-1. Network Link and Activity Indicated by the RJ-45 Port LEDs
Port LED LED Appearance Network State
Link LED Off No link (cable disconnected)
Continuously illuminated Link
Activity LED Off No network activity
Blinking Network activity
Table A-2. Network Link and Activity Indicated by the Port LED
LED Appearance Network State
Off No link (cable disconnected)
Continuously illuminated Link
Blinking Network activity