Qlogic 8400 Series, Руководство пользователя

Страница: 91 / 391

7–Installing Management Applications
Detailed Procedures
61 83840-546-00 D
Linux Client
To use HTTP, no special configuration is required on the Linux client system. Only
the QCS management application must be installed. Perform the following
configuration steps:
1. Configure HTTPS on Linux Client .
2. Follow the procedure for “Installing QCS and Related Management
Applications” on page 85 .
WMI
The WMI protocol is only supported on Windows OSs. If servers and clients both
are running Windows, then WMI can be used.
Windows Server
1. Set up Namespace Security Using WMI Control .
2. Grant DCOM Remote Launch and Activate Permission for a user or group.
3. Perform special configuration if necessary. See “Special Configuration for
WMI on Different Systems” on page 84 .
Windows Client
No special configuration is required on the Windows client except installing the
QCS management application. See
“Installing QCS and Related Management
Applications” on page 85 .
Detailed Procedures
This section provides the step-by-step instructions for each installation task. The
required tasks for each communication protocol differ, as listed in
“Installation
Tasks” on page 58 . Refer to the appropriate task list to ensure you complete all
necessary tasks for the chosen protocol.
WS-MAN on Windows Server
Install the WinRM Software Component on Server
On the following operating systems, WinRM 2.0 is preinstalled:

Windows 7

Windows 8

Windows 8.1

Windows Server 2008 R2

Windows Server 2012

Windows Server 2012 R2