Qlogic 8400 Series, Руководство пользователя

Страница: 353 / 391

17–QLogic Teaming Services
Event Log Messages
323 83840-546-00 D
Event Log Messages

Windows System Event Log Messages

Base Driver (Physical Adapter/Miniport)

Intermediate Driver (Virtual Adapter/Team)

Virtual Bus Driver
Windows System Event Log Messages
The known base and intermediate Windows System Event Log status messages
for the QLogic 8400/3400 Series adapters are listed in
Table 17-8 and Table 17-9 .
As a QLogic adapter driver loads, Windows places a status code in the system
event viewer. There may be up to two classes of entries for these event codes
depending on whether both drivers are loaded (one set for the base or miniport
driver and one set for the intermediate or teaming driver).
Base Driver (Physical Adapter/Miniport)
The base driver is identified by source L2ND . Table 17-8 lists the event log
messages supported by the base driver, explains the cause for the message, and
provides the recommended action.
NOTE
In Table 17-8 , message numbers 1 through 17 apply to both NDIS 5.x and
NDIS 6.x drivers, message numbers 18 through 23 apply only to the NDIS
6.x driver.
Table 17-8. Base Driver Event Log Messages
Message
Number
Severity Message Cause Corrective Action
1 Error Failed to allocate
memory for the
device block. Check
system memory
resource usage. The driver cannot allo-
cate memory from the
operating system. Close running applica-
tions to free memory.
2 Error Failed to allocate
map registers. The driver cannot allo-
cate map registers from
the operating system. Unload other drivers
that may allocate map
registers.