10–iSCSI Protocol
iSCSI Boot
188
83840-546-00 D
Configuring VLANs for iSCSI Boot
iSCSI traffic on the network may be isolated in a Layer-2 VLAN to segregate it
from general traffic. When this is the case, make the iSCSI interface on the
adapter a member of that VLAN.
1.
During a boot of the Initiator system, press CTRL+S to open the QLogic
CCM pre-boot utility (
).
Figure 10-8. Comprehensive Configuration Management
2.
In the CCM device list, use the up or down arrow keys to select a device,
and then press ENTER.
Figure 10-9. Configuring VLANs—CCM Device List
3.
In the Main menu, select
MBA Configuration
, and then press ENTER.
Figure 10-10. Configuring VLANs—Multiboot Agent Configuration
