Qlogic 8400 Series, Руководство пользователя

Страница: 164 / 391

8–Using QLogic Control Suite
Configuring Teaming
134 83840-546-00 D
6. If the team type is an SLB type team, click Next ( Figure 8-13 ). If the team
type is not an SLB type team, then a dialog box appears. Verify that the
network switch connected to the team members is configured correctly for
the team type, click
OK , and continue.
Figure 8-13. Configuring the Team Type
7. From the Available Adapters list, click the adapter you want to add to the
team and then click Add ( Figure 8-14 ). Remove team members from the
Team Members list by clicking the adapter and then clicking Remove . Click
Next .
NOTE
8400 Series network adapters with iSCSI or FCoE enabled can coexist
with SLB team types. FCoE can also coexist with some vendors’
switches LACP teaming mode.To continue with the creation of
non-SLB team types, first disable iSCSI or FCoE by deselecting
iSCSI
Offload Engine from the Resource Reservations area of the
Configurations tab.
NOTE

There must be at least one QLogic network adapter assigned to
the team.

A team created with a single adapter will not have load balancing
or failover capabilities.