8–Using QLogic Control Suite
Managing the Network Adapter
98
83840-546-00 D
Viewing Resource Information
The
Resources
section of the
Information
tab displays information about
connections and other essential functions for the selected network adapter.
Information Tab: Resources
Bus Type
The type of input/output (I/O) interconnect used by the adapter.
Bridge
The bridge type, which is the PCIe to PCIx bridge. This information is
only available for QLogic 8400/3400 Series adapters.
Bridge Lanes
The number of PCIe lanes connected to the bridge. This
information is only available for QLogic 8400/3400 Series adapters.
Bridge Speed
The clock speed on PCI-E bus. This information is only available
for QLogic 8400/3400 Series adapters.
Slot Number
The slot number on the system board occupied by the adapter.
This item is not available for PCI Express type adapters.
Bus Speed
The bus clock signal frequency used by the adapter. This item is not
available for PCI Express type adapters.
Bus Width
The number of bits that the bus can transfer at a single time to and
from the adapter. This item is not available for PCI Express type adapters.
Bus Number
Indicates the number of the bus where the adapter is installed.
Device Number
The number assigned to the adapter by the operating system.
Function Number
The port number of the adapter. For a single-port adapter, the
function number is 0. For a two-port adapter, the function number for the first port
is 0, and the function number for the second port is 1.
Interrupt Request
The interrupt line number that is associated with the adapter.
Valid numbers range from 2 to 25.
Memory Address
The memory mapped address that is assigned to the adapter.
This value can never be 0.
MSI Version
This is the Message Signaled Interrupts (MSI) version being used.
The option MSI corresponds to the PCI 2.2 specification that supports 32
messages and a single MSI address value. The option MSI-X corresponds to the
PCI 3.0 specification that supports 2,048 messages and an independent message
address for each message.
NOTE
Some information may not be available for all QLogic network adapters.
