8–Using QLogic Control Suite
Configuring Teaming
132
83840-546-00 D
Using the QLogic Teaming Wizard
You can use the QLogic Teaming Wizard to create a team, configure an existing
team if a team has already been created, or create a VLAN.
1.
Create or edit a team:
To create a new team, select
Create a Team
from the
Team
menu, or
right-click one of the devices in the “Unassigned Adapters” section and
select
Create a Team
. This option is not available if there are no devices
listed in the “Unassigned Adapters” sections, which means all adapters are
already assigned to teams.
To configure an existing team, right-click one of the teams in the list and
select
Edit Team
. This option is only available if a team has already been
created and is listed in the Team Management pane.
2.
To continue using the wizard, click
Next
).
Figure 8-11. Teaming Wizard
NOTE
If you prefer to work without the wizard for now, click
Expert Mode
. If
you want to always use Expert Mode to create a team, select
Default
to Expert Mode on next start
. See
“Using Expert Mode” on page 142
.
