Qilive Q.1993, Руководство пользователя, Страница: 5 / 33

55
EN
2. TECHNICAL SPECIFICATIONS
2.1
Manufacturer’s name or trade mark
SHENZHEN MERRYKING ELECTROINCS CO., LTD.
Commercial registration number and
address
8F, Blding B, Nanbiantou Science and Technology Park, Tianyang 2nd Road, Oriental Community, Songgang Street, Bao'an District, Shenzhen
City
MKC-0901500HEU
Input voltage (in V) 100-240 V~ Output power (in W) 13.5 W
Input AC frequency (in Hz) 50/60 Hz 83.6 %
Output voltage (in V) 9.0 V 81.9 %
Output current (in A) 1.5 A No-load power consumption (in W) 0.09 W
2.2 Product
Output (USB) voltage (in V) 5.0 V FM range 87.5 MHz - 108 MHz
Output (USB) current (in A) 100 mA
Speakers rated power (raw material) 40 W RMS
Output power (in W) 400.0 W maximum
Speakers maximum power (raw material) 400 W PMPO
Rechargeable battery Li-ion 7.4V 3000 mAh
Sensitivity 75 DB
Bluetooth version 5.0
Impedance 4Ω
Compatible format MP3/Wav
Frequency response (FM) 80 Hz - 18 KHz
Frequency range (bluetooth) 2402-2480MHz
Autonomy /stand by time (hours) 2 months
The maximum RF output power 2.23dBm USB speed 480 MBPS
The minimum RF output power 1.98dBm Batteries (for remote conrol) 2 x AAA 1.5 V
Working distance Maximum 10 meters (line of sight) Operating temperature -45°C - +50°C
Playing time 2-3 hours at 50% volume Unit dimensions (L x W x H) in mm 255 x 255 x 630 mm
Charging time About 4 hours Unit weigh in kg 6.1 kg
Drive units 6.5” x 2 + 1.5” x 1 Casting material Plastic
3. PACKAGE CONTENTS
• Main unit Q.x1
• 1 m AUX-IN 3.5mm cable x1
• Wired microphone x1
• AC power adapter x1
• Remote control x1
• User manual x1
4. PRODUCT DESCRIPTION
PRODUCT
1. MIC1: Microphone jack 1 to connect a microphone.
2. MIC2: Microphone jack 2 to connect a microphone.
3. AUX: Connect to any smart device with a 3.5mm jack.
4. TF Card: Directly insert a TF card to play.
5. USB: Connect to a USB storage device to play.
6. DC 9V: Inlet for the adapter to charge the speaker.
7. LED: The LED lights up red while charging. When fully charged, it lights
up green.
8.
(decrease) the frequency manually.
9. Short press to play or pause the music. In FM mode, press to auto
search.
10.
(increase) the frequency manually.
11. POWER:
12. MULTI VOLUME: Turn the knob to decrease or increase the volume level.
13. LIGHT:
14. MENU:
• When the " H " is shown in the LED display, rotate the MULTI VOL knob
to adjust the microphone's volume.
• When the " E " is shown in the LED display, rotate the MULTI VOL knob
to adjust the microphone's echo.
• When the " U " is shown in the LED display, rotate the MULTI VOL knob
to adjust the volume of the music.
15. MIC-PRI: Press this button to enter into microphone priority status. The
display shows " ON " " OFF ".
16. MODE: Switch FM/USB/AUX/BLUETOOTH (when Bluetooth is connected,
press the MODE button for 3 seconds to disconnect, and re-enter the
matching state for another phone.)
REMOTE CONTOL
17. MUTE: Press this key to mute/unmute the speaker volume.
18. MODE: Press to switch the mode between USB, FM, BT, AUX.
19. REC: With the microphone connected, press the REC button to start or
stop recording.
20. CH-: Play the previous track. Adjust radio frequency at FM mode.
21. Repeat one music or recycle for the whole under USB/TF card mode.
22. Digit 0-9: These keys are used to play a track directly in USB/TF card.
23. REC PLAY: Play the recorded music.
24. VOL+: Turn up the volume.
25. SCAN: In the FM mode, long press to scan the channel, short press for
mute. In the music mode, short press for play/pause.
26. CH+: Play the next track. Adjust radio frequency at FM mode.
27. VOL-: Turn down the volume.
28. LED:
short press to turn on.
29. MICROPHONE: For singing and recording audio.
5. USE
5.1 Installation and replacement of batteries in the remote control
Insert two size alkaline batteries (type AAA).
1. Lift the battery compartment cover at the back of the remote control, while pressing the locking tab.
2. Insert two AAA size batteries by matching the (+) and (–) ends on the battery on the batteries to the markings inside the battery compartment.
3. After inserting the tip of the cover into the slot, push the other end to close it until it clicks into place.
Note: If the batteries are installed with the wrong polarity, the remote control will not work.
5.2 Remote control
Operate the remote control within a distance of 2m and 30° between the remote and the appliance. Aim the remote control at the sensor. Remove all obstacles between
the remote and the sensor. The remote control might not work correctly if the sensor is exposed to strong sunshine. If the remote control doesn't work correctly, replace
the batteries.
5.3 Bluetooth
1. Press and hold the POWER button for 3 seconds to turn the device on. You will hear promote sound. When the LED displays "BLUE", the device automatically enters
search mode. The
Note: Quickly press numbers if choosing a number over 9. The display will
show the channel, such as 0028.