ProSoft ProLinx 104S, Руководство по протоколу

Страница: 34 / 157

Configure the Gateway 104S ♦ ProLinx Gateway
Protocol Manual (Firmware v3.00 and later)
Page 34 of 157 ProSoft Technology, Inc.
January 22, 2010
2.7 [M_BO_NA_1 104]
This section defines the 32-bit bitstring database for the server device emulated.
This information is sourced from the database and is transferred to the remote client
unit.
This section takes the following parameters:
Point #:
DB Address:
Group(s):
IV DB Bit
Each point is four, 8-bit bytes and the DB Address value corresponds to the double-
word offset in the gateway memory database. For additional information on how to
set these parameters, see the 104S Tutorial and Reference chapters of this manual.
2.8 [M_ME_NA_1 104]
This section defines the monitored measured value, normalized database for the
server device emulated. This information is sourced from the database and is
transferred to the remote client unit. To determine the IOA (Information Object
Address) for each object, add the Point # (IOA) in the following section to the value
of the
M_ME_NA Parameter Offset as entered in the [IEC-870-5-104 Database]
section.
This section takes the following parameters:
Point #:
DB Address:
Group(s):
Default
Deadband:
IV DB Bit
Each point is one, 16-bit word and the DB Address value corresponds to the word
offset in the gateway memory database. For additional information on how to set
these parameters, see the 104S Tutorial and Reference chapters of this manual.