PRONAR PRONAR N262, Руководство оператора

Страница: 130 / 145

Pronar N262 N262/1 SECTION 5
5.36
•
In the event of damage to the lacquer coating clean those places from rust and
dirt, degrease and then paint with paint maintaining uniform colour and even
thickness of protective coating. Until the time of touch-up painting, the damaged
place should be covered with a thin layer of grease, anticorrosion preparation or
priming paint.
•
It is recommended to keep the manure spreader in a closed or roofed building.
•
Before longer outdoor storage, it is essential to protect the machine against
adverse weather conditions, especially those causing corrosion and accelerated
ageing of tyres.
•
In the event of prolonged work stoppage, it is essential to lubricate all elements
regardless of the period of the last lubrication process.
•
Wheel rims and tyres should be carefully washed and dried. During longer
storage it is recommended that every 2 to 3 weeks the machine may be moved a
bit so that the place of contact of tyres with ground is changed. The tyres will not
be deformed and maintain proper geometry. Also tyre pressure should be
inspected from time to time, and if necessary pressure should be increased to
appropriate value.
•
PTO shaft for connection with tractor should be stored in the horizontal position.
5.12 REPLACEMENT OF THE SPREADING MECHANISM
BLADES
DANGER
Spreading disc blades may be checked and replaced only if the machine is disconnected
from the tractor.
Technical condition of spreading disc blades should be checked periodically paying attention
to mechanical damage, excessive wear and completeness of securing elements.