PRONAR PRONAR N262, Руководство оператора

Страница: 29 / 145

SECTION 2 Pronar N262 N262/1
2.5
•
Before beginning repair works on hydraulic or pneumatic systems reduce oil or air
pressure.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may find its way under the skin and cause infections.
•
After changing the hydraulic oil, the used oil should be properly disposed of.
2.1.4 OPERATION WITH PTO
•
Before using the machine the user should thoroughly acquaint himself with the PTO
shaft Operator's Manual and adhere to the recommendations contained in it.
•
The manure spreader may only be connected to the tractor by appropriately selected
PTO shaft recommended by the Manufacturer.
•
The drive shaft must be equipped with a cover. Do NOT use the shaft with damaged
or missing guards.
•
After connecting shaft ensure that it is correctly and safely connected to the tractor
and to the manure spreader.
•
Do NOT wear loose clothing, straps or whatever that may become wrapped round the
rotating drive shaft. Contact with rotating PTO shaft may cause severe injuries.
•
Before disconnecting the shaft, turn off the tractor engine and remove the key from the
ignition.
•
When working in limited visibility conditions, use the tractor's working lights to
illuminate the PTO shaft and its vicinity.
•
During transport the shaft must be stored in the horizontal position to avoid damage to
safety guards or other protection elements.
•
When using the manure spreader and power take-off shaft, do not use PTO rotation
speed other than 1000 rpm. Do NOT overload shaft and manure spreader and also
engage the clutch suddenly. Before starting PTO shaft make certain that the PTO
rotation direction is correct.
•
Do NOT go over and under the shaft or stand on it equally during work and also when
the manure spreader is parked.