PRONAR PRONAR N262, Руководство оператора

Страница: 32 / 145

Pronar N262 N262/1 SECTION 2
2.8
•
Each time a wheel is fitted, always check how firmly the nuts are tightened. Individual
checks should be made after the first use, after the first journey with a load, after
travelling 1000 km and then every 6 months. The above actions should be repeated
individually if a wheel has been removed from the wheel axle.
•
Check the tyre pressure regularly.
•
Protect tyre valves using suitable caps to avoid soiling.
2.1.7 MAINTENANCE
•
During the warranty period, any repairs may only be carried out by Warranty Service
authorised by the manufacturer. After the expiry of the warranty period it is
recommended that possible repairs be performed by specialised workshops.
•
Servicing and repair work should be carried out in line with the general principles of
workplace health and safety. In the event of injury, the wound must be immediately
cleaned and disinfected. In the event of more serious injuries, seek a doctor's advice.
•
Repair, maintenance and cleaning work should be carried out with the tractor engine
turned off and the ignition key removed.
•
Regularly check the condition of the bolt and nut connections.
•
Before welding or electrical work, the manure spreader should be disconnected from
the power supply.
•
Should it be necessary to change individual parts, use only original parts. Non-
adherence to these requirements may put the user and other people's health and life
at risk, and also damage the manure spreader and invalidate the warranty.
•
The paint coating should be cleaned off before beginning welding work. Burning paint
fumes are poisonous for people and animals. Welding work should be carried out in a
well lit and well ventilated space.
•
During welding work pay attention to flammable or fusible elements (parts of the
pneumatic, electric and hydraulic systems, plastic parts). If there is a risk that they will
catch fire or be damaged, they should be removed before commencing welding work.
•
In the event of work requiring the manure spreader to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the manure spreader, stable