PRONAR PRONAR N262, Руководство оператора

Страница: 90 / 145

Pronar N262 N262/1 SECTION 4
4.18
the shield. Shift the levers towards the rear of the manure spreader in order to increase flow
capacity between the shield and spreading discs and shift the levers in the opposite direction
to decrease the flow capacity.
TIP
When spreading manure containing long straw, it is recommended that the shield is
raised in order to increase flow capacity and prevent blocking of manure on spreading
discs.
attention
When spreading manure, DO NOT set the rear adjusting shield forward. The shield set in
this way may cause clogging of the space under the tailgate and blocking of
disintegrating drums and consequently, it may cause damage to overload coupling.
Regularly check degree of wear of blades and replace them if necessary.
4.5.3 SPREADING MANURE IN THE FIELD
Before commencing work check again the technical condition of hydraulic connections and
safety guards installed on the manure spreader and PTO shaft. Check if net protection is
installed on the front wall. The net protection protects the operator against injury and the
tractor against damage by thrown elements, for example, stones.
DANGER
Operation of the manure spreader without safety guards or with damaged PTO shaft
creates a direct threat to health and life of the machine operators.
There must be no bystanders within the machine working zone.
Keep a safe distance from electric power lines.
The manure spreader may be operated only with the net protection installed on the front
wall.
Do NOT spread manure near grazing animals.
The manure spreader starting procedure in order to spread manure in the field.
Set the tractor PTO rotation speed proper for the manure spreader.
Start the spreader unit by engaging drive to tractor PTO.
Start tractor PTO slowly in order to avoid damage to PTO shaft.