SECTION 2
Pronar N262 N262/1
2.9
and durable supports must also be used. Do NOT carry out work under the manure
spreader, which has only been raised with the lift jack.
•
The spreader must not be supported using fragile elements (bricks or concrete
blocks).
•
During maintenance with the tailgate raised, protect it from falling down using a cut-off
valve and a suitable mechanical support which is durable and stably mounted.
•
After completing work associated with lubrication, remove excess oil or grease.
•
Manure spreader, spreader unit in particular, should be kept clean.
•
Remove the remains of manure from the manure spreader each time after finished
work.
•
Before climbing on to the manure spreader's load box, make sure unauthorised
persons do not have access to the tractor, disconnect PTO shaft and disconnect
hydraulic system lines from the tractor.
•
Climbing into the manure spreader's load box is possible only using a ladder.
•
While climbing on to the manure spreader's load box, the manure spreader must be
absolutely motionless.
•
Exercise caution when climbing on top of the spreader load box.
2.2
DESCRIPTION OF RESIDUAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain residual risk, which could lead to an accident, and this is connected
mainly with the actions described below:
•
using manure spreader for purposes other than those described in the Operator's
Manual,
•
being between the tractor and the manure spreader while the engine is running and
when the machine is being attached,
•
operation of the manure spreader by persons under the influence of alcohol or other
intoxicating substances,
•
operation of manure spreader by an authorised person,
Содержание PRONAR N262
