PRONAR PRONAR N262, Руководство оператора

Страница: 30 / 145

Pronar N262 N262/1 SECTION 2
2.6
•
The PTO shaft has markings on the casing, indicating, which end of the shaft shall be
connected to the tractor.
•
Never use a damaged PTO shaft, it may cause an accident. A damaged shaft must be
repaired or replaced.
•
Disconnect the drive shaft each time when it is not necessary to drive the machine, or
when the tractor and spreader are at an unsuitable angle to each other.
•
The chains preventing the shaft cover from turning while the shaft is working, shall be
secured to a fixed element of spreader structure.
•
Do NOT use the securing chains to support the shaft while machine is parked or when
transporting the spreader.
2.1.5 TRANSPORTING THE MACHINE
•
When driving on public roads, comply with the road traffic regulations in force in the
country, in which the spreader is used.
•
Do not exceed the maximum design speed. Adjust driving speed to the road
conditions.
•
Travel speed must be adapted to environmental conditions and load. If possible avoid
travelling on uneven terrain and unexpected corners.
•
Exceeding the maximum load capacity of the spreader may damage it, and also
threaten the safety of traffic.
•
Load the manure spreader in such a manner as to ensure that the road is not soiled
with transported material while driving on public roads.
•
Place the slow-moving vehicle warning sign on the rear wall – figure (2.2). The
warning sign (1) should be attached using the specifically prepared holder (2), riveted
to the rear wall of the load box.