PRONAR PRONAR N262, Руководство оператора

Страница: 80 / 145

Pronar N262 N262/1 SECTION 4
4.8
•
other suspected faults
immediately cut off oil supply, disconnect tractor PTO drive and identify a fault. If a fault
cannot be rectified or the repair could void the warranty, please contact the retailer or directly
the manufacturer for additional clarifications or to perform the repair.
ATTENTION
Check correctness of hydraulic connections. Replace line plugs possibly.
Non-adherence to the recommendations stated in the Operator's Manual or improper use
of the manure spreader may cause damage to the machine.
The technical condition before starting the manure spreader must be no cause for
concern.
4.2 TECHNICAL CONDITION INSPECTION
When preparing the manure spreader for operation check the following:
technical condition of tyres and tyre pressure,
tightening of major nut and bolt connections (wheels, drawbar hitching eye,
spreading mechanism),
operation of manure spreader lights and indicators,
operation of manure spreader's brake system,
correct operation of the hydraulic system,
oil level in the lubrication system of the reduction gears according to chapter
5.5 „REDUCTION GEAR MAINTENANCE”,
technical condition of PTO shafts, their shields and securing chains. after a
stoppage, grease all the lubrication points according to the Operator's Manual
of the PTO shaft,
lubricate elements of the machine according to guidelines presented in section
5.6 „LUBRICATION OF MANURE SPREADER”, in compliance with lubrication
schedule,